4000bar High Pressure Pump 60ksi-ESL50 Waterjet Cutter Machine Original Acc Intensifer

• Customization: Available
• Certification: CE, RoHS, ISO 9001:2000
• Condition: New
• Model NO.: ESL50
• Control: Automatic
• Application: Paper, Metal, Rubber, Ceramic, Glass, Stone, Plastic, Leather, Fabric
• Power Source: Electric
• Style: Cantilever
• Type: Five-Axis
• Use: Abrasive Waterjet Cutting
• Performance: High Voltage Resistance
• Material: High Pressure Materials
• Inventory Status: Have in Stock
• Transport Package: Carton or Wooden Case
• Specification: 3000mm*2000mm
• Trademark: PMT
• Origin: Guangzhou
• HS Code: 8401100000
• Production Capacity: 100set/Year

Product Description

This is FOB price for you.

The platform can only send express, so the freight cost is wrong. Our machine can only be installed in the cabinet, so please contact the seller before placing an order

Product Description

ESL50 High presssure pump structure
 

It is includes water supply system,Hydraulic system,Waterjet Intensifer system,Electrical control system.

The Intensifier is from USA Original Accstream,the motor is Greman Siemen motor.

 

Dimension(L*W*H)	1800*1000*1400mm
Weight	1200Kg
Power rate	37kw/50hp
Max. pressure	420Mpa /4200bar
Working pressure	300-350Mpa
Max. oil discharge	104L/min
Max. Flow rate	3.7L/min
Power supply	380 V 50hz
Water supply	≥15.1L/min
Accumulator	1.5liter
Hydraulic system	Bosch Rexroth
Main Motor	Siemens Brand
Φ of orifice	0.30-0.33mm

1.Water supply system
The main engine needs two water sources for cutting and cooling, thus we need two drainages: the cooling water drainage and the water leakage drainage.Special definition is listed below:
Cutting water: The intensifier must be supplied with water of 20-1000psi (1.4-6.9bar). The input water should not less than the output water by 1.5 times.
Cooling water (for the heat exchanger): The heat exchanger is used to adjust the accumulated heat in the hydraulic oil.

2.Hydraulic system

The hydraulic system consists of pressurization, filtration, and cooling systems. The intensification principle is: a motor of
37kw drives the hydraulic pump, then the pump will pressurize the hydraulic oil up to 20Mpa max.

3.Waterjet Intensifer system
The intensification system mainly refers to the intensifier, but it also includes other components in the water circuit that make the lower pressure water into high pressure water. Specifically, it includes intensifier, accumulator, high pressure tube,connector etc. Intensifier is main part of the intensification system. A section for the intensifier 's principle, structure, and maintenance is contained in this manual.

4.Electrical control system
The electric control system is integrated into the control panel, including PC, control circuit. This control system is used to start/stop the main engine and adjust the speed. The function of the display, buttons and knobs on the panel is listed below.

"power indicator" "voltage meter" "currency meter" "master switch" "Pump & main engine switch" "high pressure/abrasive switch" "emergency stop"

 

 

 

Cutting sample

The cutting speed of mini waterjet cutting machine varies depending on the material, thickness, desired cut quality, water pressure and the machine itself configuration, Generally for PMT waterjet, you could find the following speed just for your reference.

 

Ralevant Products

Our factory not only have all kinds of size of water jet machines and waterjet spare parts, but also our company sell all kinds of stone carving machines, laser machines, bridge cutting machines, edge grinding machines, row pitch machines and rope machines and so on !!!

 

 

 

Technical Training

1, basic working principle of the super-high pressure water jet cutting machine2 , working principle of the high-pressure system
and supercharge
3 , replacement of the high-pressure sealed, low-pressure sealed and high-pressure parts
4 , maintenance of the high-pressure system and judgment and troubleshooting of common failures
5 , CNC Programming&operation&operation of the NC cutting platform
6 , daily maintenance of the NC cutting platform
7 , equipment installation
8 , abrasive control and transportation operation and CNC communication
9 , operation of the CAD / CAM software and CNC communication
10 , working principle, maintenance and judgment and troubleshooting of common failures of the main high-pressure functional
parts, high-pressure water switches and abrasive cutting head

 

 

After Sales Service

1 , Free warranty for the whole machine for one year or 2000 high-pressure/hour 2 , Training of two personnel for operation and

maintenance of equipment and one computer operator for the user
3 , On-line installation and commissioning (the user is responsible for board and lodging)
4 , Lifetime maintenance
5 , To Guarantee long-term supply of spare parts
6 , To enjoy upgrade of special prices when there are new products and technologies
7 , Repair response time: during the quality assurance period, when the user's equipment fails, respond within 24 hours after
receipt notice. For a common failure, direct the user to resume production as soon as possible by way of telephone or e-mail.

Packaging & Shipping

 

Wate jet cutting machine package : wooden package out side , inside soft packages or all of soft film and ensure safety. including hp pump ,waterjet cutting table bed with cutting head,CNC waterjet controller,waterjet sand feeder,spare parts with the pump,loading by 20feet or 40feet container. about 30-40cbm , 4000-6000kgs ,whole one set waterjet machine equiment.

Water jet spare parts : soft package inside,carton package outside. waterjet abrasive garnet sand: packing by*25kg small packing + 40bags in a big bag. The package ways aslo can according to customer requirement.

Delivery time for machines:15-30days Delivery time
waterjet spare parts : 1-7days
 

Company Profile

 

Guangzhou Perfect machinery Technology Co.,Ltd.PMTech is a high-tech Manu- facturing and trading company in waterjet cutting machineWe have accumulated more than 15 national utility model technology patents and 3 national invention patentsand won the national title of "high tech industry"through review in 2018 We focus on developind high-end ultra-high pressure pumps and wateriet cutting equipmente
We master the world's most advanced five axis dynamic and 3D cutting water jet technology. as well as 6-axis manipulator sanding/pure water cutting technoloay. We are in a leading position in the field of desiqning and manufacturing waterjet cutting machine in China.
PMT waterjet has provided hundreds of sets of high-end waterjet cutting machine to qlobal water cutting users, and has successfully established a good reputationWe sell more than 80 sets waterjet machine every year, and have loyal users and service in more than 60 countries around the world.
PMTech will always adhere to manufacturing high-quality machinery and equipment, and adhere to the concept of continuous innovation and pragmatism, and always take"making PMT a trusted brand in the world" as the goal.

FAQ

Q: What is the advantage of water jet cutting head machine?

A :Cold processing, no heat reaction zone. no deformation; strong cutting ability, pure water jet can cut soft materials, abrasive waterjet can cut hard materials; can cut flammable and explosive objects;cutting precision is high, edge is neat no secondary processing is required. Waterjet also has the title of universalcutting machine.

 

Q: How to choose the cutting table for waterjet cutting machine?

A:You need to offer the size of the materials.you want to process or the size of the cutting table.

 

Q:How to solve the incision problem of water cutting for waterjet machine ?
A:It is not a vertical cutting for a waterjet cutter. This is due to the physical characteristics of waterjet. If it is required
precise vertical angle cutting, we will provide you with a five-axis dynamic cutting system.

 

Q:Is the equipment easy to operate for waterjet cutting machine?

A:Wonlean intelligent waterjet cutting machine is easy to operate. You could upload the electronic images file of DXF format to the operating system via USB or network. The system will automatically program, and only need to set a few simple parameters, it can automatically complete the cutting operation.