| Customization: | Available |
|---|---|
| Certification: | CE, ISO |
| Color: | Fixed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
|
Model
|
3020 3axis
|
|
Dimension(mm)
|
4500*2300mm
|
|
Max. cutting range
|
3200*1750mm
|
|
Travel of Z axis
|
180mm
|
|
Servo system
|
Weihong,OEM Panasonic
|
|
ball-screw linear-rail
|
ABBA/TBI,Taiwan Brand
|
|
Re-positioning accuracy
|
±0.025mm/m
|
|
Cutting accuracy
|
±0.1mm
|
|
Max. running speed
|
15m/min
|
|
lubrication
|
Oil Immersion
|
|
Material
|
203stainless steel material tank,cast steel beam,rubber and stainless steel cover
|
|
Dimension
|
1800*1300*1400mm
|
|
Weight
|
1200kg
|
|
Power rate
|
37KW/50hp
|
|
Max. pressure
|
600Mpa/6000bar
|
|
Working pressure
|
450-600Mpa
|
|
Max. oil discharge
|
104L/min
|
|
Max. Flow rate
|
3.0L/min
|
|
Orifice Dia
|
0.25mm
|
|
Power Supply
|
380V 50hz
|
|
Water supply
|
≥15.1L/min
|
|
Accumulator
|
1.5liter
|
|
Hydraulic system
|
Bosch Rexroth
|
|
Main motor
|
Siemens Brand
|
|
Dimension(L*W*H)
|
700*700*1350mm
|
|
Weight
|
80kg
|
|
Max. capacity
|
200kg
|
|
Max. air pressure supply
|
2bar
|
|
software controlling motor adjustting regulator
|
|
|
Eliminates abrasive waste
|
|
|
fine-tune your abrasive delivery
|
|
|
30 Precision Setting
|
|
|
no more over delivery of your abrasive
|
|
|
Power supply
|
AC220V 50/60Hz
|
|
Drawing system
|
Auto-CAD
|
|
Computer system
|
Windows 7
|
|
Function
|
Remoter controller
|
|
screen
|
Apply 19 inch LCD
|
|
Water jet software nc-studio |
Support DXF file and NC code
|
|
Abrasive Removal System
|
|
|
Without electricity (only compressed air)
|
|
|
Mobile, flexible and applicable for every machine type
|
|
|
incl. 3 filter fabric bags (1t each)
|
|
|
Full control through user-friendly, manual control
|
|
Chiller 6P
|
|
|
The return water temperature of the chiller should not be higher than 40 degrees.
|
|
|
The operation of water chiller system is through refrigeration. Agent circulation system, water circulation system and electrical automatic control system are three interrelated systems. |
|
|
Chillers are divided into low-temperature chillers and normal-temperature chillers in temperature control, and the normal temperature is generally controlled within the range of 0 -35ºC. |
|
Water Treatment
|
|
|
The return water temperature of the chiller should not be higher than 40 degrees.
|
|
|
The operation of water chiller system is through refrigeration. Agent circulation system, water circulation system and electrical automatic control system are three interrelated systems. |
|
|
Chillers are divided into low-temperature chillers and normal-temperature chillers in temperature control, and the normal temperature is generally controlled within the range of 0 -35ºC. |
|
Loading Tilt Table
|
|
|
The return water temperature of the chiller should not be higher than 40 degrees.
|
|
|
The operation of water chiller system is through refrigeration. Agent circulation system, water circulation system and electrical automatic control system are three interrelated systems. |
|
|
Chillers are divided into low-temperature chillers and normal-temperature chillers in temperature control, and the normal temperature is generally controlled within the range of 0 -35ºC. |
|
Controlnest System
|
|
|
Seven different types of beveling for easy part creation
|
|
|
Support both limited and unlimited rotation for C axis
|
|
|
Can easily select different beveling type for each contour or each segment(Line or arc).
|
|
|
Can select segments to be excluded from beveling for same shape
|
|
Camera System
|
|
|
Anyone who operating a cnc water jet knows the time it takes setting up the material properly,making sure your parts will fit the material and more importantly,making the water jet start on the right position.Seven different types of beveling for easy part creation
Teenking water jet with I-camera(from IGEMS) will helps you for that.It pick points in a grid on the water jet table.This grid
will be used to transform the image into acutal size of the water jet table.Once the image lands on the drawing,it will have the remnant sheet in live size and it is the piece of cake fitting you parts. |
|
IGEMS 5x Software
|
|
|
When cutting with low speed, the jet will erode more material from the bottom of the part than cutting with higher speeds. Since we are making speed compensations for corners etc. the measurement on the top/bottom of the part is different and the angle will not be straight.
|
|
|
You can make standard 2D parts in IGEMS and add cutting angles afterwards. It's perfect for fast programming with simple designs. You can also create 3D parts from a top and a bottom geometry. When using this method, you can create more complex 3D parts using IGEMS.
|
|
|
3D-5X can use STEP and IGES files containing surfaces and solids. It means that you can cut directly on models from your 3D system. (Inventor, SolidWorks, SolidEdge etc.) Just open the file in IGEMS and add a toolpath. 3D-5X is very easy to use compared to other 3D softwares, even on complex geometry.
|
|
|
3D-5X will supply you with full 5 axis information, meaning X, Y and Z linear positions and A, B and C information for the 5 axis kinematics.
|
){kind=link}